07/02/2010

VA To Install Solar Photovoltaic in New Mexico

The Department of Veterans Affairs (VA) will install a solar photovoltaic system in Albuquerque

 
VA To Install Solar Photovoltaic in New Mexico

The Department of Veterans Affairs (VA) has awarded a contract for approximately $20 million to install a solar photovoltaic (PV) system at the Raymond G. Murphy VA Medical Center in Albuquerque using American Recovery and Reinvestment Act (ARRA) funding. It will be the largest PV system in New Mexico. 

 

The 3.2 megawatt solar PV system is estimated to produce up to 20 percent of the medical center’s annual electricity usage. The Eaton Corporation will design and install the PV system throughout the site, including car port and roof-mounted arrays, as well as implement a building-integrated system to help reduce demand from the local utility grid.

 

“The solar energy will be directly converted to usable electricity by being converted from DC to AC by the use of inverters in the system, then tied directly into our electrical distribution system,” said Bob Bruick, energy engineer for the medical center.

 

Five different areas will be used for solar panel installations, including two roof tops and three parking areas, which will be provided with covered parking canopies with solar panels on top. 

 

Work to finalize the design is expected to begin in a few weeks, with actual installation of panels to start later this summer. Bruick expects the project to be completed in early 2011. 

 

The VA selected the Albuquerque site based on results from feasibility studies to determine the optimal locations for on-site renewable energy projects. The VA’s goal is to increase renewable energy consumption to 15 percent of annual electricity usage by 2013.
 

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

 
comments powered by Disqus

Related Products

Furniture
2012 Product Innovations

Sponsored Links