11/04/2002

Carpet Maintenance in 5 Steps

Keeping Carpets Looking New, Longer

 

Carpet That Lasts and Lasts

 

To clean effectively, use a vacuum with a rotary brush, which scrubs not only the surface, but the base as well.

High-traffic areas, such as entrances and workstations, need attention daily, whereas seldom used conference rooms may not.

A good barrier mat system positioned at all exterior entrances will trap and isolate dirt before it enters your facility.

Develop an internal spot patrol. The secret to removing spots from carpet is not acting fast, but correctly. Most of the time, it’s better to blot up any excess liquid from the spill, let the spot dry, and then clean the carpet properly.

Dry carpet cleaning methods eliminate drying downtime, complaints about wet feet, and liability for water-related slips and falls. Also, dry systems can be applied anywhere, anytime, allowing you to schedule maintenance to fit your needs.

If it’s true that first impressions mean everything, the work of your cleaning crew should never be overlooked. And every facility manager has, at one time or another, had problems in this area.

Most often, complaints will center on the cleaning staff’s unreliability. Sometimes they show, other times not. But additional areas of concern involve high employee turnover, inconsistent workmanship, and the use of questionable chemicals.

Since it’s not as difficult to find people who can adequately dust furniture and empty trashcans, most facility managers would be wise to concentrate their attention on the regular maintenance being performed on carpet. After all, any type of floorcovering represents a significant investment. Following are five steps every facility manager should follow in identifying the right maintenance crew and protecting their flooring investment.

First is to locate a company that will provide consistent, high-quality service. You should meet with the cleaning crew’s management on a periodic basis to establish a mutual goal-setting process that is planned around a needs-based analysis. If the company is unwilling to spend the time to do this, you’d better begin looking for another cleaning service. Telltale signs that your maintenance crew is under-performing include dust on baseboards, cobwebs behind doorjambs, as well as paperclips or staples in the carpet.

The second step to better performance is developing a customized maintenance strategy and quick response plan. Such a plan should be based on the different traffic patterns in your facility. Some areas may need frequent cleaning, while others may only require occasional service to keep carpet looking its best.

Step three is making certain you’re receiving the most effective cleaning for your budget. If you can easily distinguish the primary traffic lanes in your facility just by looking at the carpet, your maintenance plan isn’t working. Un-removed dirt is highly abrasive to carpet fibers. And, should your maintenance crew use a wet cleaning method, water will only amplify the problem.

Other traits of wet cleaning include heavy chemical odors, soil marks on carpet edges, and rippling or buckling. It’s actually possible to over-clean your carpet. Over frequency can lead to premature deterioration.

Some companies utilize an advanced polymer-based dry cleaning technology, which clings to soil, stains, allergens, and odor sources that then are vacuumed completely away, leaving the carpet clean, dry, and odor-free.

Fourth to better maintenance is completely understanding the types of treatments used by your cleaning crew and making certain they are applied properly. Every facility manager should establish an environmental benchmark. To do so, you’ll need a complete list of chemicals, where they are used, and which, if any, are volatile. You’ll also want to be assured that the cleaning crew is properly trained and continually updated on new practices.

And, the final step is ensuring a healthy work environment for the facility’s workforce. Anything heavier than air will wind up in your carpet. When combined with moisture, residue can form a biological “sink” that allows microbials and related allergens to grow more rapidly.

To combat this, the best weapon is daily vacuuming and scheduled maintenance. You not only want to remove unwanted microbials and allergens from your carpet, but keep them from coming back.

Stephen Lewis is technical director at MilliCare Commercial Carpet Care (www.millicare.com), LaGrange, GA.

 


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Add highly responsive multi-zone comfort to any building project, in any climate. Our CITY MULTI H2i R2- and Y-Series VRF systems give you flexibility to fit the needs of any building. Enjoy 100% heating capacity at 0°F outdoor ambient, and 85% heating capacity at -13°F outdoor ambient.  For more information, log on to www.mitsubishipro.com


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Add highly responsive multi-zone comfort to any building project, in any climate. Our CITY MULTI H2i R2- and Y-Series VRF systems give you flexibility to fit the needs of any building. Enjoy 100% heating capacity at 0°F outdoor ambient, and 85% heating capacity at -13°F outdoor ambient.  For more information, log on to www.mitsubishipro.com

 
comments powered by Disqus