09/28/2012

Sham Lighting Recyclers – Are You At Risk?

Don’t be a victim – vet your recycler or pay the price

By

 

Used lamps that contain mercury must be carefully packed for storage and transport to minimize the risk of breakage. Some manufacturers offer mail-back boxes designed to contain the harmful substance.

Where do you send your used mercury-containing lamps when they leave your building?

If your answer involves a recycling facility, you’re ahead of the curve because many building operators don’t recycle lamps containing mercury properly, even though the highly toxic substance has serious environmental and health implications.

However, unless you’ve truly vetted your recycler, you may be unintentionally sending lamps to the landfill after all. This is one situation where what you don’t know can really cost you.

Sham Recycling Defined
A light bulb processor accepts unbroken bulbs that contain mercury, such as fluorescent lamps, and uses a tightly controlled process to remove and separate the mercury from the lamp so they can sell it back to the commodity market, explains Lynn Petros, owner, CEO, and chief environmental officer of Recycle Technologies, a recycler that partners directly with customers.

How Much Mercury is in Your Facility?

LAMP TYPE LIKELY LOCATION MERCURY CONTENT
Linear fluorescent (4-foot) General illumination in a variety of building types 2.5-70 mg, averaging around 13.3 mg
High-output fluorescent Warehouses, industrial facilities, storage areas Similar to linear fluorescent
Compact fluorescents (CFLs) Lighting fixtures that originally held incandescent bulbs Generally less than 10 mg, with two-thirds of those containing less than 5 mg, and a few with up to 50 mg
Metal halide Stadiums, warehouses, industrial settings where distinguishing colors is important 10-1,000 mg or more, depending on power level
Ceramic metal halide Accent lighting, retail lighting, high volume spaces with ceiling heights of 14-30 feet 5-50 mg
High pressure sodium Outdoor and industrial applications where high efficacy and long life are the highest priorities 10-50 mg, with a small percentage containing more than 50 mg
Mercury vapor* Outdoor and industrial applications, especially security equipment, roadways, and sports arenas 10-100 mg, with a small percentage containing more than 100 mg
Germicidal UV lamps (low-pressure mercury vapor) HVAC systems or other places where air or water must be sterilized 5.5-70 mg, averaging around 7.6 mg
Neon lights (all colors except red, which is produced without mercury) Retail, restaurants, anywhere with neon signage 250-600 mg, depending on the manufacturer’s preference

 

* Mercury vapor lamps are the oldest high-intensity discharge (HID) technology. Their use is rapidly diminishing because their ballasts were banned under the Energy Policy Act of 2005.

SOURCE: NORTHEAST WASTE MANAGEMENT OFFICIALS’ ASSOCIATION

A broker, by contrast, collects the lamps from your facility but pays a processor to do the actual recycling.

Both can be valid options for lamp recycling, but it pays to make sure you’re using a legitimate business.

If your recycler is caught improperly disposing of mercury-containing lamps, you’re ultimately responsible for any ensuing fines or cleanup costs.

“Some red flags are bold claims or companies that are not recyclers claiming to be recyclers,” adds Paul Abernathy, executive director of the Association of Lighting and Mercury Recyclers (ALMR), of which Recycle Technologies is a board member. “Unless you specify in a contract that they have to provide you with evidence of proper disposal, then your bulbs and money are gone and you have no idea where your light bulbs end up.”

Audit Your Current Recycler
Verifying the legitimacy of your current partner is similar to checking out a new company, minus the price and service quality you’ve observed from doing business with them.

However, it’s not difficult to trace the path your bulbs have taken, especially if you’ve chosen a truly trustworthy broker or processor.

“Do a downstream audit,” Petros explains. “You want to understand whether you’re using a processor or broker. If it’s a broker, who is the broker using?”

Also find out what happens to the separated components, especially the mercury-tainted phosphor powder, Petros says.

For example, Recycle Technologies processes bulbs, but ships the powder and filters to a distillation company. Other companies may send contaminated parts to a hazardous waste landfill, which may or may not meet your standards.

The destination facility must issue you a certificate of recycling that verifies proper disposal. Brokers can’t legally issue these, but the processor they use should, so the absence of this document is a major problem.

Ask about the street address of your bulbs’ ultimate destination, a certificate from the actual recycler, and the turnaround time between when your bulbs arrive and when processing is finished.

Processors are heavily regulated by the EPA and each state, so also make sure to ask for references or contact state agencies about environmental and compliance histories, Abernathy advises.

Look into the company’s financial health, insurance for general and pollution liability, indemnities or other assurances, permits and approvals for facility operation or transportation, operations and safety procedures and records, vapor control and monitoring, hygiene and medical surveillance, facility closure plans, audit reports, and key regulatory contacts.

How to Find a New Recycler
If you’re unsatisfied with your current recycler or just starting a formal lamp recycling program, minimize your liability by properly vetting potential business partners. Ask your local electrical distributor about mail-back programs or find national recyclers at lamprecycle.org, advises Joseph Howley, chairman of NEMA’s lamp section and manager of industry relations and environmental marketing for GE.

Start by adapting the downstream auditing process to check out companies you’re not familiar with. ALMR recommends these additional steps:

Pricing: “As with many things, you usually get what you pay for,” ALMR notes. “Question pricing and get more than one quote.”

Service: Examine responsiveness, timeliness, program flexibility and customization, the personnel you will work with, any intermediates involved, and the firm’s capability and equipment.

Risk Management: Any company that quotes you a recycling price should also demonstrate compliance with the same regulatory and environmental criteria you’d apply to a current business partner. If you can’t get satisfying answers, don’t contract with that company.

“These are all reasonable questions to ask,” Abernathy says. “But the onus is on you.”

 

Janelle Penny janelle.penny@buildings.com is associate editor of BUILDINGS.

 

 


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

 

Add highly responsive multi-zone comfort to any building project, in any climate. Our CITY MULTI H2i R2- and Y-Series VRF systems give you flexibility to fit the needs of any building. Enjoy 100% heating capacity at 0°F outdoor ambient, and 85% heating capacity at -13°F outdoor ambient.  For more information, log on to www.mitsubishipro.com


Tennant Company is a recognized leader in designing, manufacturing and marketing solutions that help create a cleaner, safer, healthier world. With thousands of satisfied customers already using award winning ec-H2O technology, why not see what you're missing? Test ec-H2O on your soils in your facility. Get a free demo.


Tennant Company is a recognized leader in designing, manufacturing and marketing solutions that help create a cleaner, safer, healthier world. With thousands of satisfied customers already using award winning ec-H2O technology, why not see what you're missing? Test ec-H2O on your soils in your facility. Get a free demo.

 

Replace core drilling with Connectrac In-Carpet and On-Floor Wireways, the proven connectivity solution in open interior spaces of all kinds. These elegant low-profile wireways are great for AV / telecom connectivity wherever it’s needed.

 


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

 

Add highly responsive multi-zone comfort to any building project, in any climate. Our CITY MULTI H2i R2- and Y-Series VRF systems give you flexibility to fit the needs of any building. Enjoy 100% heating capacity at 0°F outdoor ambient, and 85% heating capacity at -13°F outdoor ambient.  For more information, log on to www.mitsubishipro.com


Tennant Company is a recognized leader in designing, manufacturing and marketing solutions that help create a cleaner, safer, healthier world. With thousands of satisfied customers already using award winning ec-H2O technology, why not see what you're missing? Test ec-H2O on your soils in your facility. Get a free demo.


Tennant Company is a recognized leader in designing, manufacturing and marketing solutions that help create a cleaner, safer, healthier world. With thousands of satisfied customers already using award winning ec-H2O technology, why not see what you're missing? Test ec-H2O on your soils in your facility. Get a free demo.

 

Replace core drilling with Connectrac In-Carpet and On-Floor Wireways, the proven connectivity solution in open interior spaces of all kinds. These elegant low-profile wireways are great for AV / telecom connectivity wherever it’s needed.

 


 
comments powered by Disqus

Related Products

HVAC
Security
Energy Management

Sponsored Links