11/12/2012

Roof Surfacings 101

How to match your roof with the best resurfacing material

By Richard L. Fricklas

 
  • /Portals/1/images/OnlineImages/2012/1112/rr/rr_1114_articleimage_aluminized.jpg

    For a smooth surface bituminous roof, consider asphalt-aluminum roof coatings or a reflective white coating – ideally, an acrylic coat over an asphalt bleed blocking primer.

  • /Portals/1/images/OnlineImages/2012/1112/rr/rr_1114_articleimage_hotapplication.jpg

    Bituminous systems are most often surfaced with a flood coat of bitumen that contains aggregate.

  • /Portals/1/images/OnlineImages/2012/1112/rr/rr_1114_articleimage_emulsion.jpg

    Asphalt emulsion applied with sprayed, chopped glass fibers pairs well with a reflective acrylic- or aluminum-based finish.

  • /Portals/1/images/OnlineImages/2012/1112/rr/rr_1114_articleimage_penetration.jpg

    View Larger

Roofing systems have a finite life. Depending upon the composition of the roof system, it may be possible to extend roof life with an economically viable option.

There are many combinations that can yield long-lasting roof systems, but the purpose of this article is to dive into the basics of several common systems and available options.

The Right Surfacing for Low Slope Roofing Systems
Bituminous systems consist of asphalt or coal tar pitch as the adhesive and waterproofing and contain reinforcements of organic glass fiber or asbestos fibers. These systems are surfaced with aggregate embedded in a flood coat of bitumen, either hot- or cold-applied.

To prepare for resurfacing, use a high-pressure, low-volume wet vacuum to remove dirt and loose aggregate.

Surfacing options include:

  • New flood coat of hot asphalt or pitch with new aggregate
  • Solvent-based mastic and aggregate (sometimes called “resaturant”)
  • Membrane and flashing replacement or repair with modified bituminous materials applied by torch, hot mopping, or a cold applied mastic or adhesive
  • Asphalt emulsion applied with sprayed, chopped glass fibers, with a reflective roof coating such as acrylic- or aluminum-based products used to provide a finish surface after the emulsion coating
  • For a smooth surface bituminous roof, asphalt-aluminum roof coatings (either solvent- or water-based) or a reflective white coating such as acrylics, urethanes, silicones, or ureas. An acrylic over an asphalt bleed blocking primer is an ideal combination.

Polymer-modified bituminous systems consist of polyester or glass fiber mats or scrims modified with polymers of atactic polypropylene (APP) or styrene-butadiene-styrene (SBS). They are frequently surfaced with factory-applied roofing granules.

Surfacing options include:

  • Vacuum or power broom existing surface
  • Heat from torching to soften the substrate – hot application of new cap sheet may require asphalt primer
  • Granulated and smooth surfaced modified bitumen roofs can also be surfaced with aluminum-based coatings, as well as white reflective acrylics, urethanes, silicones, and ureas.


Pages: 1  2  View All  
 

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


 
comments powered by Disqus

Sponsored Links