The conventional bucket and adhesive approach to flooring installation might kick the bucket. New systems and technologies have floored the industry, touting benefits that traditional methods lack.
“To meet the demands of the marketplace, there is a trend moving to alternative installation systems,” explains Lewis G. Migliore, president of LGM and Associates, a flooring consulting firm. “These technologies include backing materials, bucketless adhesives, and snap-together click systems.”
Familiarize yourself with these advances and their advantages to make the right choice for your facility.
Sustainability Spurs New Systems
Adhesives traditionally incorporate harmful solvents. Around 20 years ago, the EPA started forcing manufacturers to make water-based products, which some believed hurt performance.
“In response, we developed an acrylic polymer adhesive that is pre-applied directly to any resilient flooring product. It’s elastomeric – neither solid nor liquid,” explains Devin Schlisner, operations manager of Base King, developer of the EnviroSTIX Adhesive System. “The release liner is peeled, then the flooring is bonded.”
EnviroSTIX is comparable to the Powerbond peel-and-stick system by Tandus Flooring and the polyacrylic adhesive Free Lay used by Bentley Prince Street, Migliore says.
Taking a diffierent approach, Chilewich Sultan partnered with Textile Rubber & Chemical Co. and Velcro Industries to create the BioFelt tile and backing system, which “velcros” together. The entire system is then held down via silicone adhesive on the Velcro squares.
“Pressure from the design community to become greener and move away from vinyl backing systems drove us to create BioFelt, which is 82% pre- and post-consumer recycled content,” explains Joe Sultan, CEO of Chilewich Sultan. “The material is a polyester felt made from pop and water bottles.”
BioFelt is similar to TacTiles by Interface and LokDots by Shaw Industries Group, says Migliore, adding that the nature of these new technologies allows them to sidestep certain drawbacks presented by conventional systems.
Compromising Conditions Not a Concern
Aside from going green, another demand in the marketplace is for systems that resist the damaging impact of moisture and alkalinity, especially in concrete substrates, Migliore explains. “Polyacrylic adhesives are virtually unaffected by moisture,” he adds.
Between the temperature range of -20 degrees and 120 degrees C., the EnviroSTIX adhesive will remain in its elastomeric state, Schlisner says.
“The adhesive has no real shelf life,” he says. “It doesn’t dry out and lose bond like traditional adhesives. Even if you have a flood, as long as the water is cleaned up in a week or two, the flooring would be fine.”
Due to these properties, EnviroSTIX is more cost comparable to moisture remediation than bucket adhesives. It averages $2 per square foot, whereas moisture remediation can cost $3-7 and is invasive and time-consuming.
“It’s an alternative solution, and if your area is prone to moisture, that justifies the cost,” Schlisner says.