04/10/2013

Could Copper be the Cure for Healthcare Facilities?

 
Infections can run rampant in healthcare facilities causing serious damage to your bottom line and people's lives.  Could copper be the cure?

New research has revealed that the use of Antimicrobial Copper surfaces in hospital rooms can reduce the number of healthcare-acquired infections (HAIs) by 58% as compared to patients treated in Intensive Care Units with non-copper touch surfaces. In the United States, 1 out of every 20 hospital patients develops an HAI, resulting in an estimated 100,000 deaths per year. Although numerous strategies have been developed to decrease these infections, Antimicrobial Copper is the only strategy that works continuously, has been scientifically proven to be effective and doesn't depend on human behavior, according to a recently published study in the SHEA Journal of Infection Control and Hospital Epidemiology.

"The implications of this study are critical," said Dr. Harold Michels, Senior Vice President of the Copper Development Association (CDA). "Until now, the only attempts to reduce HAIs have required hand hygiene, increased cleaning and patient screening, which don't necessarily stop the growth of these bacteria the way copper alloy surfaces do. We now know that copper is the game-changer: it has the potential to save lives."

Intensive Care Units See the Benefit of Copper Alloys

The study, funded by the U.S. Department of Defense, was conducted in the Intensive Care Units (ICUs) of three major hospitals: The Medical University of South Carolina, Memorial Sloan-Kettering Cancer Center in New York City and the Ralph H. Johnson Veterans Affairs Medical Center in Charleston, South Carolina. To determine the impact of copper alloy surfaces on the rate of HAIs, copper-surfaced objects were placed in each ICU, where patients are at higher risk due to the severity of their illnesses, invasive procedures and frequent interaction with healthcare workers. Patients were randomly placed in available rooms with or without copper alloy surfaces, and the rates of HAIs were compared. A total of 650 patients and 16 rooms (8 copper and 8 standard) were studied between July 12, 2010 and June 14, 2011.

Results of this study, that appeared last July in the Journal of Clinical Microbiology, found that Antimicrobial Copper can continuously kill 83% of bacteria that cause HAIs within two hours, including strands resistant to antibiotics. The study compared copper to equivalent non-copper touch surfaces during active patient care between routine cleaning and sanitizing.

"Copper alloy surfaces offer an alternative way to reduce the increasing number of HAIs, without having to worry about changing healthcare worker behavior," said Dr. Michael Schmidt, Vice Chairman of Microbiology and Immunology at the Medical University of South Carolina and one of the authors of the study. "Because the antimicrobial effect is a continuous property of copper, the regrowth of deadly bacteria is significantly less on these surfaces, making a safer environment for hospital patients."

In study results, 46 patients developed an HAI, while 26 patients became colonized with MRSA or VRE. Overall, the proportion of patients who developed an HAI was significantly lower among those assigned to intensive care rooms with objects fabricated using copper alloys. There are currently hundreds of Antimicrobial Copper healthcare-related products available today, including IV poles, stretchers, tray tables and door hardware.

This study was so successful that an interdisciplinary team from UCLA began replicating this research in July 2012. The team is testing ICUs with Antimicrobial Copper at Ronald Reagan UCLA Medical Center.

 

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


 
comments powered by Disqus

Related Products

Sponsored Links