Can your asphalt parking lot last 50 years?
Most facility managers are unaware that asphalt pavement can have a service life of more than five decades with the appropriate design, good construction practices, and timely preventive maintenance.
Called perpetual pavement, this design and rehabilitation approach provides a sustainable strategy that extends the lifecycle and performance of your asphalt while decreasing reconstruction costs and natural resources.
Proper Pavement Design
According to the National Asphalt Pavement Association, perpetual pavement is “an asphalt pavement designed and built to last longer than 50 years without requiring major structural rehabilitation or reconstruction and needing only periodic surface renewal in response to distresses confined to the top of the pavement.”
Following good pavement design
practices helps your asphalt reach its design service life. In far too many cases, the general practice is to use the same specification regardless of goals, budget, available materials, location, environment, subbase, or traffic use.
For your perpetual pavement to meet your goals, you must first address the structure and foundation, which work in conjunction to allow the pavement to be perpetual. A proper base will allow you to resurface as needed for added years of service.
The key to long-term performance of any pavement system is a solid foundation. Without the right base, the upper layers of a perpetual pavement system
are bound to fail.
Two areas of failure that need to be accounted for are structural rutting and fatigue cracking. Structural rutting occurs when the overall strength of the pavement has degraded to the point that deformations can take place in all of the asphalt layers and even transfer into the crushed aggregate base or the subgrade layer.
Fatigue cracking is also evident in today’s traditional pavements. This failure is when cracking occurs from the bottom up through the surface course. This can lead to pumping, rutting, and accelerated surface deterioration.
A properly designed foundation consists of a variety of components, such as modified or unmodified soils or crushed aggregate and recycled products like crushed concrete or milled asphalt.