09/01/2013

Strategizing for Success

How to bridge your team’s skill gap brick by brick

By

 

2) Master Planning for Staff Improvement
After assessment has started, move on to the planning phase. Having the benchmark of your staff’s test results makes it easier to set realistic, obtainable goals, Cowley explains.

“Once you know where you are, you can set a goal and continue to raise the bar until you can’t get any better,” says Cowley. “Don’t get carried away. If you’re not doing any preventive maintenance now, don’t say ‘I’m going to be 100% compliant by the end of the quarter’ – it’s not going to happen. Maybe your goal for the next quarter is to do preventive maintenance on 25% of your assets, and then maybe the next quarter is the next 25%, and so forth so that by the end of the year you’re 100% compliant. Slowly raise the bar as time, energy, and resources allow.”

3) Make Incentives Count
A long-term goal for improvement requires a deep commitment from each team member expected to complete training. In most cases, the carrot approach is more effective than the stick in incentivizing employees to participate, says Cowley.

4 Ways to Find Skill Deficiencies

Work audits: Any unexpected incident or negative customer feedback should trigger a work audit, where you or another highly trained manager will return to a job site and inspect an employee’s work. For best results, randomly select a few work orders periodically and audit them as well – this will give you a baseline of performance quality that you might not get if you’re only auditing catastrophes.

Customer surveys: Think of the last time you bought an item on Amazon or stayed in a hotel – did you receive an invitation to share feedback? You can easily adapt this tactic to your FM department. Instead of asking “Did you have a pleasant visit?” and “Were you greeted when you walked in the door,” you’ll ask about job completion and the maintenance crew’s culture, says Mike Cowley, president of CE Maintenance Solutions.

“You want to know about the quality of his work. Did it solve the problem? You’d be surprised how many times that doesn’t really happen,” Cowley says. “Did he clean up his work area when he left? Did he communicate with you that he was finished? You can set up a generic email template that says ‘Your work order is now complete. Please fill out this survey so we can serve you better.’”

performance Appraisals: These will occur yearly at a bare minimum and should also be delivered prior to any promotion and after a significant change in performance. As you’re preparing to deliver annual appraisals to employees, mentally rate each person as an A, B, or C player, Cowley recommends.

“A players are the best – they have the most skills and potential and are the hardest workers. They’re solid, fantastic employees,” Cowley explains. “Then come B’s and C’s. Congratulate the A’s and come up with a plan to make the B’s into A’s. Can you fix the C’s? Sometimes you can’t.”

Peer reviews: These coincide with the annual appraisal, but must be structured in a way that doesn’t allow the peer review process to descend into blame and backbiting, Cowley says. Set boundaries from the start by restricting the team to only giving feedback about certain qualities, such as knowledge, performance, and work ethic.

“Don’t let it become a process of ‘You dinged me last year, so I’m going to get you this year,’” Cowley adds. “You’ve got to start slowly and keep a close eye on it or it can get out of hand.”

“Forward-thinking companies will tie in a small salary increase to completing skill-building courses,” recommends Goebel. “You need senior management – not only HR, but also the plant manager – to understand that this is a long-term investment.”

It can be difficult to find room for such incentives in the age of doing less with more. However, as Cowley points out, the alternative – leaving the skill gap to grow – will only exacerbate the problem over time.

“I just did an assessment of a large casino, and one of the comments was ‘What if we train these people and then they leave?’” Cowley explains. “To that, I say ‘What if you don’t train them and they stay here for five years?’”

Formal annual performance appraisals can also be counted among incentives, as part of their function is to reward positive outcomes and discourage negative ones.

“Management appraisals would include things like what their performance is like and their team skills. You can even have sections on there that talk about their potential,” Cowley says. “If you have someone that’s in charge of project management for new construction and renovations, you’d look at the performance of his projects, the timeliness, the accuracy, and attention to detail. Consider how well they plan, whether their scheduling process is neat and organized, and how well they know what’s going on when you ask where a project stands. Use some of your customer satisfaction surveys to give you an idea of where problems may exist.”

Non-management personnel may have additional measurements reflected on their appraisals. This could include things like tardiness, attendance, technical skills, and safety performance (as measured by the frequency of incidents you have to record for OSHA), as well as interpersonal items like “going above and beyond the call of duty, willing to work overtime, and having a can-do attitude,” says Cowley.

Also take a look at the job descriptions for your department. Are you giving feedback on every responsibility? What about the indirect qualities that distinguish good employees from great ones? Tie all appraisals – both the routine annual one and the one you should be giving any individual whose performance has changed significantly, good or bad – to promotions and raises, Cowley suggests.

“The hard part is sitting down and discussing that written appraisal with the employee. Do it honestly and in a timely manner,” Cowley recommends. “You don’t want to be saying ‘I didn’t like what you did last year.’ It will be meaningless by then.”

4) Assemble Resources

Mind These Gaps

Not sure where to start measuring performance? Consider tracking these factors, both for your team as a whole and for individual employees:

  • Schedule compliance and timeliness
  • Frequency of return calls (repeated complaints about the same thing indicates either a larger problem with the equipment or a lack of knowledge about how to fix the problem)
  • Teamwork
  • Attitude and culture
  • Percentage of planned work vs. emergencies
  • Work quality (use the results of work audits and customer surveys to keep this measurement as objective as possible)
  • Proactive vs. reactive work
  • Cleanliness and organization
  • Safety incidents
What’s available in your area to boost your employees’ training? Before incurring the cost of bringing in a consultant, check with your local community college. Many offer courses and certifications in FM-related disciplines, such as HVAC, LEAN, and electrical work.

Some, like the North Carolina Community College System, can even help with your master planning by determining what skills are necessary for each job on your team and crafting a customized program.

“North Carolina developed a program called customized industrial training, where they ask what skills you need to work at each facility. You might list things like Microsoft Word and Excel, safety, first aid, management, and maintenance training,” Goebel says. “Then the college will put together a program for you and say ‘Here’s what you asked for and here’s how we’ll address it. The company, the community college, and third-party providers all work together to identify the skill gap and come up with the plan that’s best for the company. That’s the holy grail of getting things done efficiently.”

Vendors can also be a rich source of knowledge. Approach a vendor you have an existing contract with and request a seminar related to their expertise – for example, a two-hour HVAC 101 class from the vendor that conducts annual preventive maintenance on your chillers. “I guarantee every one of them will do it for free,” explains Cowley. “Make those mandatory classes, especially in HVAC and electrical.”

As you build up your FM crew from all four sides, also pay attention to a fifth requirement for improvement – attitude. You’re the head of your FM crew, so be ready to lead.

“Be confident. Even if you’re going to make mistakes, you have to go full-force,” says Cowley. “If you make mistakes, say you made them, then turn around and fix it. You have to understand the process and what your people are doing, because if you can’t understand it, you can’t help them fix it. You’ve got to set the vision.”

 

Janelle Penny janelle.penny@buildings.com is associate editor of BUILDINGS.


Pages: 1  2  View All  
 

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


 
comments powered by Disqus

Related Products

Sponsored Links