7. Do and Redo:
Direct a Security Audit
There are many steps a facilities professional can take to safeguard a property.
One of your strongest tools, however, is to do a security audit. Start by creating
a checklist; then refine through building changes, both structural- and tenant-related.
• Doors, Windows, and Other Openings
· Confirm each door/window has working locks.
· Confirm locking devices are modern and appropriate.
· Check door/window frames for looseness and rotting.
· Install burglar-resistant glass.
· Do not heavily screen or bar low windows unless an emergency release
mechanism is also installed.
· If appropriate, wire windows/doors for alarms if broken or forced open.
· If appropriate, use unobstructed, shatterproof glass on entrance doors.
· Install hinges on the inside of exterior doors.
· Secure all building openings, such as air ducts, skylights, etc.
• Lighting
· Ensure alleys, loading docks, and other isolated exterior areas are
well-lit.
· Leave night lights on throughout a property.
· Protect lamps with shatter-proof lenses or recess lighting to prevent
vandalism.
• Access Security
· Use codes for labeling.
· Keep accurate records of people with keys or cardkeys.
· Limit distribution: Have one or two individual in charge of distributing,
collecting, and keeping keys/cardkeys.
· Collect keys from terminated or transferring employees.
· Mark all keys "Do not duplicate" to avoid a locksmith making
copies.
· Change locks, combinations, codes periodically.
• Landscaping
· Don't allow landscaping to provide hiding places for would-be thieves/assailants.
· Keep all shrubbery pruned and even.
· Keep ladders and other tools locked up.
· Clear property of all debris.
• Alarm, Intercom, and CCTV
· Check all alarm systems regularly.
· Post prominent notices of alarm systems as a deterrent.
· Regularly test building intercom systems to ensure connection is clear.
· Furnish all stairwell doors with alarms.
· If appropriate, install visitor call phones, gate houses, doormen, CCTV,
etc.
· Monitor remote and little-used entryways by CCTV, where appropriate.
• Elevators
· Program elevators to stop at the lobby level before going down to or
after coming up from the basement.
· Investigate mirrored walls in elevator cabs so people can see the entire
interior before entering.
· Program elevators to bypass uninhabited floors.
· Connect elevator stop buttons to an alarm bell and security station.
· Install 24-hour monitored phones in elevators.
• Employee and Visitor Identification
· Establish a system of employee/visitor ID badges or building passes
when lobby security is present.
· Establish a system of employee sign-in and sign-out sheets for after-hours.
· Establish an authorization system for removing property from the building.
· Insist on identification from all visitors.
· Develop a procedure where all visitors check in with a security guard
to state the nature of their business on the property.
• Miscellaneous
· Lock workstations.
· Encourage staff and occupants to report suspicious-looking persons.
· Control access to the building.
· Paint floor numbers boldly on stair side of hall exit doors.
· Keep inventory records of equipment/possessions, including a description,
serial numbers, and identifying marks.
· Avoid painting a property in dark colors.
· Post emergency numbers for staff and occupants.
· Keep limited amounts of cash on the premises. Alter trips to the bank
(for deposits) so they are not predictable to observers.
· Prosecute all offenders.
· Communicate with tenants, staff, and contractors that an offender was
prosecuted.
SOURCE: Before Disaster Strikes: Developing an Emergency Procedures Manual,
Institute of Real Estate Management (www.irem.org).