11/16/2001

More Power to You

Reclaiming the economic potential of on-site emergency and standby generators

 

A Close Shave

In one real life example, a 670,000-square-foot suburban facility in northern New Jersey helped satisfy needle peak summer demand with 500 kW of capacity from its on-site standby generation system. The facility's energy demand is quite typical for light industrial, commercial, and office facilities, with mid-afternoon peak demand more than three times early morning demand.

Operating on-site power unit costs from five to seven cents per kilowatt-hour. Since generating peak demand electricity could cost the utility from $1 to more than $5 a kilowatt-hour, the utility gladly paid the owner a premium over his operational costs. Over the course of one recent year, using the standby system for peak shaving netted the owner in excess of $35,000.

Preparing emergency and standby systems for peaking duty requires a means of dispatch, load control, verification, and an operating summary.

By Bhavesh S. Patel

When on-site power units - emergency and standby generators - sit unused, except during power outages and periodic testing, it's like throwing away potential. Using them to generate power during normal operation can reduce a building's energy expense. Such practices accrue directly to the bottom line.

There's never been a better time to take advantage of these assets. Energy shortages are spreading across the country. Electricity costs continue moving upward, sometimes at alarming rates. Moreover, there's increasing demand for more reliable power.

The opportunities hang like ripe fruit on a low branch waiting to be picked. Rather than cherries and apples, though, they're called peak shaving, curtailment, aggregation, etc. Selecting which to pick is just a matter of deciding what meshes better with your building's energy requirements.

Peak shaving, for example, reduces the amount of utility-provided electricity that your building uses during times of greatest demand for electricity, usually from 12:00 p.m. to 5:00 p.m. on hot summer afternoons. These peak periods total about 200 kilowatt-hours per year and are generally the most expensive electricity you can buy. In fact, many utilities pay commercial customers to cut their demand in this way. Talk about a "no-brainer" way to cut costs.

Curtailment is the other side of the peak shaving coin. Curtailment can be voluntary or mandatory. Another name for mandatory curtailment is rolling blackout. In either case, you have no choice: When the utility needs to reduce its total electrical load, your building is elected. Operations stop. Work stands still. People sit around. How much does that cost you, or your tenants? They won't be happy campers.

Solve the problem by using your on-site power units. They can help make up the difference in power, depending on their generation capacity. Building operations keep humming. People keep working.

Aggregation pools the generation capacity of your on-site units with others. You and other facilities professionals agree to start your units when power is required and it collectively reduces demand - as if the energy flowed out across the utility distribution system to where it's needed. Unlike peak shaving and curtailment, your units are generating power to get better pricing for a larger volume of electricity.

Using on-site power units for these purposes, however, can be a difficult decision for building owners and facilities managers. Does the electrical code allow it? What happens if a power outage occurs while the units are satisfying other power needs?

It's okay, according to the National Electric Code, to use emergency gen-sets this way. Specifically, NFPA 70, Art. 700, 701, and 702 - which addresses installation and operation of emergency, legally required, and optional standby power systems - allows the use of these systems for peak shaving.

In addition, if an unexpected power outage occurs while the on-site units are operating, power from the units is immediately transferred to the intended emergency or standby load.

With today's pressure to optimize return on investment in a building, "waking up" on-site power units can provide an unexpected - and welcome - economic benefit.

Bhavesh S. Patel is manager of Strategic Business Development at ASCO Power Technologies (www.asco.com), Florham Park, NJ. ASCO is a world leader and pioneering innovator in transfer switch technology for on-site power units and other applications.

 

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

 
comments powered by Disqus

Sponsored Links