05/01/2009

Chemical- vs. Water-Based Suppression

Which type of fire suppression is best for your building?

 

Gaseous fire-suppression systems are most often associated with high-value/high-tech applications, based on the impression that water and electronic equipment don’t mix. In the 1980s, the “clean” agent Halon 1301 was king of fire suppression for these applications. With the advent of the Montreal Protocol concerning ozone depletion, the Halon 1301 commercial market collapsed almost overnight.

While manufacturers scrambled to find a replacement agent, loss-prevention managers were forced to find alternatives. Because of their water concerns, many managers chose pre-action sprinkler systems. A typical pre-action system requires the activation of the fire-alarm system before water is allowed to enter the pipe. This would prevent accidently knocking a sprinkler and causing massive water damage.

More Important Information

  • The Intl. Building Code and Intl. Fire Code require the use of sprinkler systems for all building areas. Substituting a gaseous agent for the sprinkler system is contingent on approval from the authority having jurisdiction.
  • Although halocarbons are stored as liquid, they rapidly expand into a gas upon discharge. While they don’t create the room pressures of the inert gases, room venting still needs to be investigated.
  • Because of the expense of halocarbon gases, testing is performed using a combination of a room-integrity test and a functional fire-detection system test.
  • Nitrogen generators that allow the system piping to dry out and eliminate the hassle of bottles for the sprinkler market have recently been introduced. Nitrogen has a dew point of around -40 degrees F.
  • Consideration should be given to an early-warning fire-detection system, regardless of which fire-suppression system is used.
The pre-action system be­­came so popular that, when replacement gases came to market, they didn’t capture back the Halon 1301 market share. Many high-value/high-tech facilities managers continue to install pre-action systems.

So, the question is this: Which is best for your application? The answer, of course, is: It depends. Experience has shown that, often, this decision is based on issues not directly related to fire concerns. Water damage is one example. Gaseous agents potentially provide a level of protection that sprinklers can’t, and vice versa. The goal of gaseous agents is to extinguish a fire in the incipient stages, thus giving a level of protection to the equipment within the area of origin; however, it’s a onetime application that, if it fails, could result in the loss of the building. The goal of sprinklers is to protect the building, thus affording less protection to the equipment.

Halon 1301 replacement agents fall into two categories: halocarbon agents and inert gases. While there are pros to using either of these agents or pre-action sprinklers, the cons often weigh more heavily in the choice. With the notion of a “clean” agent, halocarbons are found to be clean as long as they don’t extinguish a fire. In the process of extinguishing a fire, they create hydrogen fluoride, which can damage equipment and harm humans in the area.

Inert agents are stored in gas form, which requires high-pressure cylinders and a large amount of storage space. Because of the high-pressure nature of the gas, relief venting is a must. For all gaseous agents, room integrity is critical and involves a coordinated effort among architects, engineers, and contractors.

Pre-action sprinkler systems have issues of their own. The assumption that these systems are “dry” is false security. These systems trap large amounts of humid air and water during testing. Resulting corrosion has lead to a huge problem in the industry, especially in systems installed for more than 10 years. The solution has been to put nitrogen on the system, but bottled nitrogen is a maintenance headache. A recent development with nitrogen generators for the sprinkler market makes pre-action systems a much more viable solution.

David J. Burkhart is principal at St. Louis-based Code Consultants Inc.

 

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

 
comments powered by Disqus

Related Products

Tools, Services and Software
Tools, Services and Software

Sponsored Links