08/07/2009

PMI Leads Coalition to Drive New Water Efficiency Standards in Texas

 

The Plumbing Manufacturers Institute (PMI) has led a coalition to help Texas become the second state nationwide to require high-efficiency toilets (HETs) in all new residential and commercial construction.

Texas House Bill 2667 was signed into law by Governor Rick Perry on June 19 and becomes effective September 1 this year, and it sets maximum showerhead flow rates at 2.5 gallons per minute and urinal flush volumes at 0.5 gallons of water per flush (GPF), in addition to the HET requirement. An HET is defined as a water closet that uses no more than 1.28 GPF or 20 percent less than the 1.6-GPF models mandated by the National Energy Policy Act of 1992 (EPAct).

The bill requires that toilet and urinal manufacturers phase in HETs over the next 4 years, starting with 50 percent of in-state sales by January 1, 2010, and culminating with 100 percent by January 1, 2014. Additionally, the legislation states that any plumbing product certified by the federal WaterSense® Program is exempt from the new Texas efficiency standards, and it repeals all manufacturer product-filing fees and testing requirements formerly required by the Texas Commission on Environmental Quality, the state testing and certification agency.

The legislation was filed on March 6 by Representative Alan Ritter (D-Nederland). Carole Baker of the Alliance for Water Efficiency and Karen Guz of the San Antonio Water System testified on behalf of the legislation. Environmental groups, such as the Natl. Wildlife Federation and the Lone Star Chapter of the Sierra Club also registered support for HB 2667.

Texas is now the second state (after California) to pass a law requiring HETs.

 

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

 
comments powered by Disqus

Related Products

Sponsored Links