12/01/2009

Black vs. White Roofing

There are three reasons why the decision isn't clear-cut when it comes to selecting the right roofing membrane

By Dean A. Rutila

 
  • Here, a hot asphalt application of white modified asphalt cap sheet is shown

    Here, a hot asphalt application of white modified asphalt cap sheet is shown

    /Portals/1/images/Magazines/1209/B_1209_Roofing2.jpg

    Here, a hot asphalt application of white modified asphalt cap sheet is shown.

    Here, a hot asphalt application of white modified asphalt cap sheet is shown
  • comparing a few common membranes in a few cities using Cash’s method

    comparing a few common membranes in a few cities using Cash’s method

    /Portals/1/images/Magazines/1209/B_1209_Roofing1.jpg

    Table 1: comparing a few common membranes in a few cities using Cash’s method

    comparing a few common membranes in a few cities using Cash’s method
  • A completed white cap sheet application (white granules in pail are embedded in asphalt along laps) is shown.

    A completed white cap sheet application (white granules in pail are embedded in asphalt along laps) is shown.

    /Portals/1/images/Magazines/1209/B_1209_Roofing3.jpg

    A completed white cap sheet application (white granules in pail are embedded in asphalt along laps) is shown.

    A completed white cap sheet application (white granules in pail are embedded in asphalt along laps) is shown.
  • This photo shows laboratory samples of green coatings being prepared for durability testing.

    This photo shows laboratory samples of green coatings being prepared for durability testing.

    /Portals/1/images/Magazines/1209/B_1209_Roofing4.jpg

    This photo shows laboratory samples of green coatings being prepared for durability testing.

    This photo shows laboratory samples of green coatings being prepared for durability testing.
  • The “calculator” suggests there’s a heating penalty in each location for a white roof

    The “calculator” suggests there’s a heating penalty in each location for a white roof

    /Portals/1/images/Magazines/1209/B_1209_Roofing5.jpg

    Table 2: compares the same membranes and cities as in Table 1. The “calculator” suggests there’s a heating penalty in each location for a white roof, but that the air-conditioning savings exceed the penalty (based on the input assumptions).

    The “calculator” suggests there’s a heating penalty in each location for a white roof

There’s much more to selecting a roof membrane than color – but it’s not a black-and-white decision. The environmental benefits of exposed-membrane, low-slope roofing systems with high solar reflectance and thermal emittance have been established by the Cool Roof Rating Council (CRRC), Lawrence Berkeley National Laboratory, and others. Generally white in color or with white surfacing, these membranes reduce the solar radiation collected by roofing surfaces, which lowers the roof-surface contribution to the energy used to condition air and to the local environment. (All cool roofs are included as white roofs in this article because tan and other membranes meet high reflectance/emittance requirements.) But white isn’t always best.

Why Not a Black-and-White Decision?
If high solar reflectance and emittance are better, and generally found in white membranes, why isn’t the decision black and white? There are three reasons.

Reason No. 1: Surface Temperature vs. Durability. Some manufacturers propose that a white membrane equals greater durability, which is a misleading claim. Any membrane will be more durable if its surface temperature is lower on any roof; however, a cooler membrane in a particular location on a particular building isn’t necessarily more durable than a different membrane on the same building that’s not as “cool.” Although it may be necessary (by law) or desirable to use a white membrane, that membrane isn’t necessarily more durable than a black membrane.

Carl G. Cash, in The Relative Durability of Low-Slope Roofing, described the mean local temperature (thermal load) and its effect on membrane durability. All membranes show lower durability in southern U.S. climates compared to more temperate climates. Many white membranes are less durable in all climates, and less durable than black membranes in any climate. Table 1 compares a few common membranes in a few cities using Cash’s method. These predictions are based on temperature-related deterioration and survey data of roofing performance.

Reason No. 2: Heating Benefits in Cold Climates. Some manufacturers propose that a black membrane lowers heating costs by more than any penalty for added cooling costs, which is also a potentially misleading claim. There are scientific and common-sense arguments about the comparison of black and white membranes in temperate climates. For many buildings in temperate climates, there is no air conditioning and no reduced air-conditioning energy benefit for the use of a white roofing system, and there is some heating benefit to black roofing in the winter (the benefit varies with the amount of sunshine); however, even if you don’t air condition your building, you may want it cooler in the summer.

Definitions and Background

Heat Island.
Under many conditions, cities get hotter because of the reduced vegetation and the heat that’s absorbed and retained in buildings, roads, etc. If we can reduce the energy absorbed and retained, we can lower energy use and reduce climate impact. The U.S. EPA provides a resource for evaluating and mitigating the heat island effect (www.epa.gov/heatisland), including the use of cool roofing.
Solar Reflectance.
The U.S. DOE, Cool Roof Rating Council (CRRC), and others use solar reflectance as a measure of reflected sunlight energy (visible and non-visible) to evaluate roofing materials. Ongoing research continues to refine the measurements and methods of measurement, but the results of the available science today are useful in selecting cool roofing. The DOE/EPA ENERGY STAR rating requires measurement over a 3-year period to account for weathering, dirt pick-up, etc. that might reduce reflectance. The CRRC provides aged values that provide similar information. A higher solar reflectance value indicates that more solar radiation is reflected. Although most cool-roof, low-slope membranes are white, other colored materials also provide cool roofs, particularly for sloped systems.
Heat Emittance.
Membranes radiate heat back to the atmosphere at different rates; a higher heat emittance results in a lower surface temperature and less heat transferred into the building. The Cool Roof Rating Council publishes emittance values that can be used in evaluating membranes against the California Energy Code requirements for cool roofing. The CRRC also provides a solar reflectance index that combines reflectance and emittance to simplify comparisons.
The U.S. DOE Cool Roof Calculator from Oak Ridge National Laboratory provides a method of estimating the energy benefit/penalty of black and white roofing systems. Table 2 compares the same membranes and cities as in Table 1. The “calculator” suggests there’s a heating penalty in each location for a white roof, but that the air-conditioning savings exceed the penalty (based on the input assumptions). The calculator also estimates the amount of thermal insulation that must be added to allow a black roof to match the cooling savings on a white roof.

Reason No. 3: Environmental Benefits of Durability. The benefits of the CRRC Rating Program, the U.S. DOE’s ENERGY STAR program, and other government regulations requiring high-reflectance (and high-emittance) membranes don’t address the environmental benefit/penalty of durable/less durable roofing membranes. While there are acknowledged limitations on the evaluations of reflectance and emittance values, they’re still useful tools.

The environmental benefits of any roofing decision can be thought of as part of the quality and value understanding of the cost (initial and/or life-cycle) and durability. If you’re limited to solar reflectance standards (e.g. ENERGY STAR), you’re led to white roofing. If you’re limited to proven service life, you’re more likely to determine that a black membrane is appropriate.

Presently, we have useful and on-going science related to solar reflectance/emittance. We have the 10-year-old work by Cash related to durability and life-cycle costs. But we don’t yet have a thorough understanding of the environmental cradle-to-grave costs of any black roofing membrane compared to a white membrane, such as environmental risks of manufacturing, installation, and disposal. For now, we base our evaluation on the best data we have from the CRRC, the DOE, and Cash.

Beyond Black vs. White
Black membranes need not create black roofs. Vegetated green roofs can use black membranes because performance isn’t affected by the membrane solar reflectance. Ballasted black membranes can have similar performance to white membranes. Built-up membranes can be surfaced with ENERGY STAR cap sheets, creating a white membrane. Coatings can be applied to low-performing membranes, based on solar reflectance and emittance, to meet the California Energy Code. (Long-term durability in terms of coatings is a concern, and is the subject of testing; some coatings, such as methyl methacrylate, are likely to be durable.)

Recommendations

Until research advances on exposed membrane roofing systems:

  • Select the most durable roofing membrane you can afford based on the research available.
  • Use membranes with high solar reflectance and emittance in hot, sunny climates, and where required by law (e.g. California).
  • Use membranes with high solar reflectance and emittance on air-conditioned buildings in all climates as long as durability isn’t compromised and there’s no significant energy-consumption penalty (e.g. based on U.S. DOE Cool Roof Calculator). Generally, we expect research to demonstrate that the environmental benefits of 10 extra years of service will outweigh other environmental benefits in U.S. climates.

For most roofing assemblies, use a white ENERGY STAR/CRRC membrane with a high aged solar reflectance (above 0.70) and initial emissivity (0.85) from the durable membranes based on climate. Consider built-up, ENERGY STAR/CRRC alternatives to thermoplastic membranes in extreme southern U.S. climates. Use black built-up and EPDM membranes where heat island issues are limited on buildings without air conditioning, and where there’s a significant energy penalty for a white membrane, or where ballast or other green roofing solutions provide similar performance to a white roof.

Dean A. Rutila is a principal at Boston-based Simpson, Gumpertz, and Heger.

 

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Need portable cooling?

Rent or buy spot coolers from full-service locations nationwide. On call “24/7”. Primary, supplemental or emergency cooling. Atlas Sales & Rentals, Inc., or call (800) 972-6600.

Click here for more info


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


 
comments powered by Disqus

Related Products

Sponsored Links