Originally published in Interiors & Sources

02/03/2010

How Earthquakes Affect Buildings

Research has spawned numerous innovations

By Ronald O. Hamburger

 
How Earthquakes Affect Buildings

Permanent ground deformations can tear a structure apart. Some foundation types are better able to resist these permanent ground deformations than others. For example, the use of pile foundations, with the piles extending beneath the anticipated zone of soil liquefaction, can be effective in mitigating the hazard’s effects. The use of heavily reinforced mats can also be effective in resisting moderate ground deformation due to fault rupture or lateral spreading. Most earthquake-induced building damage, however, is a result of ground shaking. When the ground shakes at a building site, the building’s foundations vibrate in a manner that’s similar to the surrounding ground.

 

Brittle elements tend to break and lose strength. (Examples of brittle elements include unreinforced masonry walls that crack when overstressed in shear, and unconfined concrete elements that crush under compressive overloads.) Ductile elements are able to deform beyond their elastic strength limit and continue to carry load. (Examples of ductile elements include tension braces and adequately braced beams in moment frames (see Steel Structures that Provide Earthquake Resistance, below.)

 

For economic reasons, building codes permit buildings to be damaged by the infrequent severe earthquakes that may affect them, but prevent collapse and endangerment of life safety. For buildings that house important functions essential to post-earthquake recovery, including hospitals, fire stations, emergency communications centers, etc., codes adopt more conservative criteria that’s intended to minimize the risk that the buildings would be so severely damaged they could not be used for their intended function.

Steel Structures that Provide Earthquake Resistance

Braced-frame systems rely on the stiffness and strength of vertical truss systems for lateral resistance. Braced frames are categorized as concentric or eccentric, depending on whether the connections of braces to beams, columns, and beam-to-column joints are concentric or not. Concentrically braced frames can have many alternative patterns, including a single diagonal brace in a bay, intersecting X-pattern braces in a bay, and inverted-V-pattern and V-pattern braces in a bay. The latter case is also known as “chevron-pattern bracing.” Buckling-restrained braced frames are a special type of concentrically braced frame with braces specially designed to withstand yield level compressive forces without buckling. Eccentrically braced frames are arranged as modifications of the single-diagonal pattern or chevron-pattern bracing. AISC 341 places strict limits on the eccentricities and detailing that can be used.

 

Shear-wall systems rely on vertical plates, reinforced by bounding structural members, to provide lateral resistance.

 

Moment-frame systems rely on the rigidity of beams and columns interconnected to resist relative rotation. There are frames in which conventional rolled shapes are used as the beams in the frames, and frames in which trusses form the horizontal members of the frames.

Dual systems utilize a combination of moment frames and braced frames or shear walls. The moment frame, acting alone, must be capable of providing at least 25 percent of the structure’s required lateral seismic resistance; the braced frames or shear walls that the moment frames are paired with must be proportioned, based on their stiffness, to resist that portion of the total required design lateral forces (determined considering their interaction with the moment frame, which may be more or less than 75 percent of the total required resistance, and may vary with height).

 

Cantilevered columns systems rely on the cantilever strength and stiffness of columns restrained against rotation at their bases.

 

Each of these elements can be coupled with different horizontal elements, including wood-sheathed floors and roofs, steel deck roofs, concrete-filled steel deck floors and roofs, formed concrete slabs, precast concrete floors and roofs, and horizontal bracing systems.

 

Throughout the 20th century, the intent of seismic design in building codes was to avoid earthquake-induced damage that would pose a significant risk to safety while still permitting economical designs. Thus, building code provisions were developed that would permit some damage to occur, but protect against damage likely to lead to either local or partial collapse, or the generation of dangerous falling debris. When these building codes were first developed, the technical community didn’t have a good understanding of ground shaking, its magnitude, the dynamic response characteristics of structures, or nonlinear behavior. Today’s codes still seek to protect life safety vs. minimize damage, but do so through a variety of prescriptive criteria based on observation, as well as laboratory and analytical research.

 

Research has spawned numerous innovations now common in earthquake engineering, including ductile detailing of concrete structures, improved connections for moment frames, base isolation technology, energy dissipation technology, and computing tools.

 

Current research activities are focused on three areas: 1) performance-based design, 2) development of damage-resistant systems, and 3) improvement in the ability to predict the occurrence and intensity of earthquakes.

 

The concept of performance-based design is that a designer can be inventive in terms of the combinations of structural framing systems and detailing chosen vs. adhering to prescriptive criteria contained in building code. But this approach presumes that the designer can demonstrate, typically through simulation, that the structure is capable of performing acceptably. The ability to actually implement performance-based design is becoming more practical. As this trend continues, designers will find that they’re no longer constrained to certain structural systems and configurations, or have to adhere to minimum design base shears, drift, or detailing criteria, which provides more freedom in the design of structures of the future.

 

The Most Important Aspects of Seismic Design

Continuity. The pieces that comprise a structure must be connected with sufficient strength so that, when the structure responds to shaking, the pieces don’t pull apart and the structure responds as an integral unit.

 

Stiffness and Strength. Structures must have sufficient lateral and vertical strength so the forces induced by relatively frequent, low-intensity earthquakes don’t cause damage, and rare, high-intensity earthquakes don’t strain elements so far beyond yield points that they lose strength.

 

Regularity. A structure is “regular” if its configuration has a pattern of lateral deformation during response to shaking that’s relatively uniform throughout its height – without twisting or large concentrations of deformation in small areas of the structure.  

 

Redundancy. Redundancy is important because of the basic design strategy behind the building codes. If a structure only has a few elements to resist earthquake-induced forces, the structure may lose its ability to resist further shaking when those elements become damaged; however, if a large number of seismic-load-resisting elements are present and some become damaged, others may still provide stability.

 

Defined Yield Mechanisms. In this approach, which is often termed “capacity design,” you must decide which elements are going to yield under a strong earthquake. These elements are detailed so they can sustain yielding without undesirable strength loss. At the same time, all other elements of the structure, such as gravity load-carrying beams, columns, and connections, are proportioned so they’re strong enough to withstand the maximum forces and deformations that can be delivered by an earthquake once the intended yield mechanism has been engaged.

 

Ronald O. Hamburger is a principal at Simpson Gumpertz & Heger.

 

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

Connectrac wireways offer discrete power and technology connectivity in open interior spaces of all kinds; affordably, quickly and with long-term flexibility.



When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.

Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Mitsubishi Electric’s H2i R2-Series heat pumps provide 100% heating capacity down to 0° F and simultaneous heating and cooling down to -4° F delivering year-round comfort, regardless of climate zone.

 
comments powered by Disqus

Related Products

Sponsored Links