Industry News




 

03/20/2012

Top 10 Data Center Surprises

 
Top 10 Data Center Surprises

With everything else on a facility manager’s plate each day, there’s no room to be surprised by data center issues.  How can a facility manager or building owner tackle data center problems before they happen?

Emerson Network Power offers a look at the top ten data center surprises.  Don’t get caught with expensive downtime or other technical disasters by making sure these knowledge bytes are stored before problems have you scrambling for solutions.

1.            Those high-density predictions finally are coming true: After rapid growth early in the century, projections of double-digit rack densities have been slow to come to fruition. Average densities hovered between 6.0 and 7.4 kW per rack from 2006 to 2009, but the most recent Data Center Users’ Group (DCUG) survey predicted average rack densities will reach 12.0 kW within three years. That puts a premium on adequate UPS capacity and power distribution as well as cooling to handle the corresponding heat output.  

2.            Data center managers will replace servers three times before they replace UPS or cooling systems: Server refreshes happen approximately every three years. Cooling and UPS systems are expected to last much longer—sometimes decades. That means the infrastructure organizations invest in today must be able to support—or, more accurately, scale to support—servers that may be two, three or even four generations removed from today’s models. What does that mean for today’s data center manager? It makes it imperative that today’s infrastructure technologies have the ability to scale to support future needs. Modular solutions can scale to meet both short- and long-term requirements.

3.            Downtime is expensive: Everyone understands downtime is bad, but the actual costs associated with an unplanned outage are stunning. According to a Ponemon Institute study, an outage can cost an organization an average of about $5,000 per minute. That’s $300,000 in just an hour. The same study indicates the most common causes of downtime are UPS battery failure and exceeding UPS capacity. Avoid those problems by investing in the right UPS—adequately sized to support the load—and proactively monitoring and maintaining batteries.

4.            Water and the data center do not mix – but we keep trying: The first part of this probably isn’t a surprise. Sensitive IT equipment does not respond well to water. However, the aforementioned Ponemon study indicates 35% of all unplanned outages are a result of some type of water incursion. These aren’t just leaky valves; in fact, many water-related outages are the result of a spilled coffee or diet soda. The fix: Check those valves, but more importantly, check the drinks at the door.

5.            New servers use more power than old servers: Sever consolidation and virtualization can shrink server inventory by huge numbers, but that doesn’t exactly equate to huge energy savings. New virtualized servers, especially powerful blade servers, can consume four or five times as much energy as those from the preceding generation (although they usually do it more efficiently). The relatively modest savings at the end of that consolidation project may come as a surprise. There is no fix for this, but prepare for it by making sure the infrastructure is adequate to support the power and cooling needs of these new servers.

6.            Monitoring is a mess: IT managers have more visibility into their data centers than ever before, but accessing and making sense of the data that comes with that visibility can be a daunting task. According to an Emerson Network Power survey of data center professionals, data center managers use, on average, at least four different software platforms to manage their physical infrastructure. 41% of those surveyed say they produce three or more reports for their supervisors every month, and 34% say it takes three hours or more to prepare those reports. The solution? Move toward a single monitoring and management platform. Today’s DCIM solutions can consolidate that information and proactively manage the infrastructure to improve energy and operational efficiency and even availability.

7.            The IT guy is in charge of the building’s HVAC system: The gap between IT and Facilities is shrinking, and the lion’s share of the responsibility for both pieces is falling on the IT professionals. Traditionally, IT and data center managers have had to work through Facilities when they need more power or cooling to support increasing IT needs. That process is being streamlined, thanks in large part to those aforementioned DCIM solutions that increase visibility and control over all aspects of a building’s infrastructure. Forward-thinking data center managers are developing a DCIM strategy to help them understand this expansion of their roles and responsibilities.

8.            That patchwork data center needs to be a quilt: In the past, data center managers freely mixed and matched components from various vendors because those systems worked together only tangentially. That is changing. The advent of increasingly intelligent, dynamic infrastructure technologies and monitoring and management systems has increased the amount of actionable data across the data center, delivering real-time modeling capabilities that enable significant operational efficiencies. IT and infrastructure systems still can work independently, but to truly leverage the full extent of their capabilities, integration is imperative.

9.            Data center on demand is a reality: The days of lengthy design, order and deployment delays are over. Today there are modular, integrated, rapidly deployable data center solutions for any space. Integrated, virtually plug-and-play solutions that include rack, server and power and cooling can be installed easily in a closet or conference room. On the larger end, containerized data centers can be used to quickly establish a network or to add capacity to an existing data center. The solution to most problems is a phone call away.

10.          IT loads vary – a lot: Many industries see extreme peaks and valleys in their network usage. Financial institutions, for example, may see heavy use during traditional business hours and virtually nothing overnight. Holiday shopping and tax seasons also can create unusual spikes in IT activity. Businesses depending on their IT systems during these times need to have the capacity to handle those peaks, but often can operate inefficiently during the valleys. A scalable infrastructure with intelligent controls can adjust to those highs and lows to ensure efficient operation.

 


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Mitsubishi Electric Cooling & Heating’s new H2i R2-Series heat pumps provide year-round comfort, even in extreme climates. With 100% heating capacity down to 0° F outdoor ambient and simultaneous heating and cooling down to -4° F, our hyper-heating systems bring highly responsive multi-zone comfort to your projects, regardless of climate zone.

http://news.mehvac.com/hhlaunch/


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.

Mitsubishi Electric Cooling & Heating’s new H2i R2-Series heat pumps provide year-round comfort, even in extreme climates. With 100% heating capacity down to 0° F outdoor ambient and simultaneous heating and cooling down to -4° F, our hyper-heating systems bring highly responsive multi-zone comfort to your projects, regardless of climate zone.

http://news.mehvac.com/hhlaunch/


 
03/30/2015

New technology driving increased demand on healthcare systems.

03/27/2015

Capital ranks #1 in certified buildings.

03/26/2015

New sensor cable technology can detect all types of security breaches.

03/25/2015

Facilities will help cut government GHG emissions by 40%.

03/24/2015

Building sustainability shown to improve tenant happiness.

03/23/2015

New technology to improve the efficiency of wind power systems.

03/20/2015

Reduction of storm activity due to climate change will increase extreme weather.

03/19/2015

Simple ventilation improvements could save over $20,000 per year.

03/18/2015

Efforts to minimize climate change may be more effective than previously thought.

03/17/2015

Researchers develop new approach to create renewable energy.

03/16/2015

Report shows wind becoming cost competitive in more states.

03/13/2015

Study shows “fragrances” may be more than they appear.

03/12/2015

New energy storage configurations could cut costs.

03/11/2015

Program will streamline certification processes, code familiarity.

03/06/2015

Study shows buildings such as hospitals could cut energy use.

03/05/2015

Small and medium-sized buildings will soon have automation options.

03/04/2015

Form will aid lenders in assessing value of sustainable design.

03/03/2015

Expanded choices offer climate-friendly solutions.

03/02/2015

New technology could slash consumption up to 30%.

02/27/2015

Design is low-cost and green while providing more energy storage.

Page 1 of 51
FirstPrevious[1]2345678910NextLast

Sponsored Links