Industry News




 

03/04/2013

Domestic Hot Water: A Better Option?

By Nick Tallos

 
Could domestic hot water be the best choice for your healthcare facility?

The facts are frightening – especially since the problem can be avoided.

Consider this: As many as one in 10 patients hospitalized in the U.S. contracts an infection, according to the Wall Street Journal. That means nearly 2 million patients annually are infected by bacterium or other agents.

The end result?

 

The cost is nearly 100,000 deaths and $6.5 billion in overall losses.

 

Hand washing is a long-standing means of fighting such infections. Doctors, nurses and other hospital employees, as well as patients and guests, constantly wash their hands typically using hot water to do so.

 

The supply of hot water -- and the time in which it is delivered – makes an efficiently designed domestic hot water system paramount in a hospital. And that makes thermostatically controlled hot water flow control valves just what the doctors ordered. Unfortunately, these valves aren’t used as often as they should.

 

Normally, a domestic hot water system is manually balanced. Enough hot water flows at a rate to insure that when a faucet is turned on, heated water is quickly delivered at a specified temperature set point - often 120 degrees Fahrenheit. To achieve this, the system is balanced with manually operated valves opened to produce the desired flow rate.

 

With multiple end points at sinks and showers, balancing usually requires two or more plumbing contractors. They must spend significant amounts of time between the hot water supply and the loop that services a particular bank of sinks or other fixtures, tweaking flow rates until the desired temperature is delivered.

 

A better method of achieving hot water balancing while using a fraction of the labor is to use a thermostatically controlled valve that opens and closes mechanically based on a temperature set point. For a hospital, this design has many advantages.

 

One major advantage is the cost reduction realized from the reduced flow. Using a thermostatically controlled valve only requires hot water flow when the temperature drops -- not the constant flow that a manually balanced system needs. 

 

In a manually balanced system, constant flow requires an engineer-specified pump of sufficient capacity to achieve the desired temperature setting. Such a pump will be driven by a powerful electric motor.

 

Unfortunately, a larger pump and motor combination is more expensive; because of the higher flow that must be maintained, they wear more quickly and wear out faster. More constant recirculating flow means more wear and tear on piping, pumps, valves and fittings -- and ultimately higher costs. This is particularly true at healthcare facilities, which generally have more hot water fixtures than other buildings.

 

In addition, the larger pumping motor results in higher energy consumption.

 

Another cost of a manually balanced system is added maintenance due to erosion.  A constant and greater flow for maintaining a required hot water temperature leads to fluid wearing the piping’s insides. Fluid flow encounters certain spots of turbulent flow around bends and changes in direction that gradually wear the piping’s internal walls. Over time, the piping or its fittings or joints may leak, requiring replacement.

 

Such an occurrence not only would be hazardous to patients and personnel, but could mean that hospital rooms and facilities are taken out of operation. That’s something no hospital can afford.

 

A better option is a modestly priced stainless steel control valve that uses a temperature sensor installed at the end points of hot water supply systems.

 

This inline fitting thermostatically controls a temperature set point in the 110-120-degree Fahrenheit range. The thermostatic actuator expands or contracts and controls hot water flow in the domestic hot water system’s branches, thereby modulating flow to the individual end points.

 

Instead of using constant high flow to control the availability of hot water on demand, it uses temperature, consequently requiring much less work and demand by the hot water system. And note that this fitting’s stainless steel construction should last longer because it is highly corrosion resistant.

 

Another factor in favor of thermostatically controlled domestic hot water balancing valves is water conservation. According to the U.S. Department of Energy (DOE), healthcare systems are among a community’s largest water consumers.

 

Consumption, however, varies greatly -- water use per capita ranges from 40 to 350 gallons per day. And the DOE cites a Massachusetts Water Resources Authority study that concluded that sanitary usage by a hospital is by far its largest category of water consumption, guzzling 42 percent of all water. The DOE advised that "hospitals can realize significant savings by upgrading toilet, shower and faucet technologies."

 

For a patient, employee or patron who turns on a shower or sink and waits for hot water, what happens to the water that runs out cold? It usually is wasted. The shorter this takes, the less waste.

 

Thermostatically controlled recirculating valves are used by many demanding facilities, such as stadiums, hospitals and hotels, where maintenance budgets are always under scrutiny, and the availability of hot water on demand is important.

 

Other facilities should join the movement toward thermostatically controlled recirculating valves.

 

Nick Tallos is the vice president of engineering for Therm-Omega-Tech

 


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


Visit our website today to learn about the design flexibility of a Morton building and the endless possibilities of partnering with our designBUILD team.


Wood construction is both cost and energy efficient. Check out Morton Buildings and our designBUILD team online today to discover all the benefits of post-frame construction.


When choosing a metal-clad building for your next construction project, consider Morton Buildings, Inc., and their designBUILD team, we’ll make your dream a reality.

Yaskawa drives offer quality performance for air handlers and cooling towers on the roof to secondary chilled water pumps in the basement

Bluebeam® Revu® simplifies digital facilities document management from design review to leveraging as-builts, maintenance manuals and O&Ms submittals.

We Can Help You Reduce Energy by 30%

Our mission is to help our customers manage their buildings' energy costs, improve reliability, and enhance performance while having a positive impact on the environment.
CLICK HERE to find out how.


 
07/22/2014

How to keep building occupants safe during the hot season.

07/21/2014

Spaces grow denser as the industry emerges from a slump.

07/18/2014

Study ranks states on fuel and consumption.

07/16/2014

Enhance cleaning practices at your educational facilities.

07/11/2014

Tenants have low tolerance for even one pest sighting, a new survey reveals.

07/10/2014

Battery installations will fuel federal research.

07/03/2014

An ongoing pilot program targets carbon neutrality.

06/27/2014

Potential substitute chemicals boast a low global warming potential.

06/26/2014

Tap into the DOE’s new data stream for renewable energy.

06/23/2014

What to do when the rain stops and the flood recedes.

06/18/2014

Mitigation policies grow in response to changing climate.

06/17/2014

The 2014 World Cup welcomes six LEED-certified arenas.

06/11/2014

An updated study now observes local consequences.

06/06/2014

New survey reveals increasing interest in off-site work.

06/04/2014

Gain ground on sustainability goals.

05/30/2014

With World Environment Day quickly approaching, now is the perfect time for cleaning professionals to think about implementing a green cleaning program or review green products currently in use.

05/28/2014

In 2013, approximately 6.5 million people were employed in the renewable energy industry worldwide.

05/27/2014

Saving money through energy management strategies in Canadian healthcare institutions just got easier.

05/22/2014

A recent study has revealed that the bacteria Legionella, commonly found in fresh water, is able to survive in certain automobile windshield washer fluids.

05/21/2014

Industrial symbiosis is essential to a company’s environmental efforts and can even drive profits.

Page 1 of 43
FirstPrevious[1]2345678910NextLast

Sponsored Links