How to Avoid Roofing Condensation Issues

12/01/2013 | By Christopher Curtland

If your roof, deck, or insulation is developing water droplets, chances are your forehead is too. But with proper design and maintenance principles, you don't have to sweat roof condensation issues.

Although moisture problems in the roof assembly can be due to waterproofing deficiencies, don't neglect the effect of condensation. Depending on a building's use and location, some scenarios can present condensation problems.

Air leakage from within a building carries moisture that can result in condensation in the roof assembly, notes Richard L. Fricklas, former technical director emeritus of the Roofing Industry Educational Institute. Familiarize yourself with the following conditions so you can keep condensation failures out of your facility.


Roofs are vulnerable to condensation anytime warm, moist interior air rising up through a building comes into contact with a cold roof assembly.

"In areas with more heating days per year, generally in the north, wintertime becomes problematic. When humid air from the interior makes contact with the underside of the roof surface, the water vapor it's carrying turns into liquid water," explains Jose F. Ponce, technical specialist with Professional Roof Consultants. "Think of a cold drink sitting out on a summer day. The same phenomenon happens with roof systems."

Now is a good time to look for warning signs. Keep an eye out for drips, usually observed at midday when the sun is shining and the membrane's temperature is on the rise, recommends Craig Tyler, architect and specification developer for Carlisle Construction Materials. Don't assume dripping is from leakage.

Roof cuts and thermographic imaging can also detect moisture, in addition to other strategies.

"Cracking noises can sometimes be heard when walking on the roof during wintertime, as a thin layer of ice breaks," he adds. "On structural concrete and possibly wood planks, or plywood, moisture drips may not be observed. But frozen moisture can be detected in the form of spongy, buckled, or warped insulation beneath the membrane."

Pay attention to reflective roofs that are designed to reduce heat gain by using both solar reflectivity and thermal emissivity to remain cool. Cool roof temperatures may increase the possibility of condensation if warm, moist air from the interior comes into contact with the assembly.

"Cool roofs can include asphalt built-up membranes like fiberglass, modified bitumen, and torchdown; single-ply membranes like TPO, PVC, and EPDM; metal panels; coatings; and even shingles," explains Dale W. Apple, technical specialist with Professional Roof Consultants. "A very common misconception is that all cool roofs are white and single-ply membranes."

Any material that redirects the sun's rays and reroutes heat to its surroundings can be classified as a cool roof by the Cool Roof Rating Council, as long as its solar reflectivity and thermal emissivity values correspond to the climate.

Remedial action depends on the intensity of condensation, but it can be as severe as system replacement, Tyler says.

"In less costly options, wet insulation can be replaced in affected areas and a darker colored membrane can be installed, possibly with a fleece backing, allowing the system to warm a little," he adds. "If the structure can sustain added weight, you can convert the roof into an inverted membrane assembly by simply adding polystyrene insulation, protection fabric, and stone ballast."

Pages: 1  2  View All  

Related Coverage

antalya escort
escort antalya
xxx movies ladyhammer casino
18 film izle
ankara escort
replica watches
istanbul escort
British Shorthair Cat
manavgat eskort