Vinyl Rib Roofing System by Duro-Last

05/12/2010 |

Vinyl Rib Roofing System by Duro-Last

Vinyl Rib Roofing System by Duro-Last


Duro-Last Roofing’s Vinyl Rib roofing system is ideal for commercial applications where the aesthetic appearance of architectural standing seam and the proven, watertight performance of a single-ply roofing system are desired.


The Vinyl Rib system consists of the Duro-Last single-ply membrane and separate vinyl ribs that are attached to the installation membrane. After membrane sections are fully adhered to the roof deck, ribs are heat-welded to the membrane to ensure a permanent, secure installation.


Flashings for penetrations and other transition areas are precision-fabricated in a Duro-Last facility; there is no on-site assembly of these pieces. The Duro-Last Vinyl Rib system is complete, with all components delivered to the jobsite, ready to be installed by an authorized Duro-Last contractor.


The Vinyl Rib system is available in light gray and white, and uses Duro-Last’s 60-mil membrane, fully adhered to the roof deck (no mechanical fasteners) to provide a smooth roof surface.


For more information, visit  


Related Coverage