Buildings Buzz

Why BEMS Systems May Soon Be Extinct

For decades, facility managers have relied on energy management solutions that monitor only one type of equipment – whether it was for metering, EPSS, HVAC, load management or storage. While it’s great for hardware manufacturers and suppliers to lock in their customers to a single-vendor solution, it creates a headache for facility operators who have to manage and maintain different types of equipment separately.

Further complicating the energy management landscape is the fact that over time, facility operators and managers may add new equipment to existing legacy assets because the next-generation technology better meets their feature or budgetary requirements. Take into consideration the overwhelming types of equipment available from a multitude of vendors and the energy management and connectivity challenges can multiply exponentially in a facility.

While BEMS (Building Energy Management System) solutions exist, BEMS providers cannot connect to all types of facility equipment and provide for multi-function operation. A much more comprehensive solution is needed and this solution could pave the way toward BEMS extinction.

Move Over BEMS

The explosion of IP-connected energy equipment has been a major driver for vendor-agnostic energy management software that connects to and monitors any type of power equipment found in facilities. Recently, such software solutions have entered the marketplace and not only provide energy management at the local facility level but also at the enterprise level for organizations that operate facilities spanning multiple locations. The need to tie geographically dispersed facilities has driven a new power management category known as centralized facility management, or CFM.

Because the Internet makes remote management and connectivity cost-effective, facility operators and managers for single-site or multi-site facilities can connect thousands of power-related devices in a quick and efficient way, creating a digital energy network.

The Energy IoT

Implementing an “energy Internet of Things” solution that connects a digital energy network can give facility operators a deep level of insight into operations and the opportunity to monitor and control any connected device. Any operator who has access to the Internet-enabled dashboard can remotely manage power controls or dispatch technicians before anything bad happens with equipment or operational systems. In addition to monitoring energy performance and efficiency, Internet-enabled energy management platforms can allow facility operators to test the energy resiliency of their operations – which is absolutely critical in complex facilities where bad things happen when the lights go out. 

Is an IoT-enabled CFM approach right for you?

Here’s a quick checklist that can help you better understand your current environment, potential limitations and if your operations could benefit from adopting a CFM approach:

1) Do you run a critical and complex facility where a power outage could have a devastating effect on operations?
2) Are you unsure if/or how to determine if my facility is resilient enough to overcome a major power outage or related disaster?
3) Does your facility environment consist of “dumb” siloed energy equipment systems that can’t or don’t “talk” to each other.
4) Do you have to log into multiple cumbersome dashboards to get a holistic view of facility health and energy data?
5) Do you own/manage multiple buildings but are only able to view and manage the data of each site individually?
6) Does corporate management have no way to determine how individual facilities are performing against each other?
7) Are you unsure why power usage – at a single or multiple-sites – is so high or how you can increase efficiencies and cost savings?
8) Are buying decisions and capital budget allocations are typically based on equipment age and not necessarily real-time performance metrics?

If you answered “yes” to any of the above, a shift in both management and technology approach could benefit your organization.

The bottom line is that the Internet is making it easier to manage critical and complex facilities that have relied on SCADA or BEMS solutions in the past. New energy management software can work for single-site or multi-site facilities and with any energy equipment, providing a single solution that can allow more accurate assessments of your facility’s energy needs. It seems so simple because it is. 

Tom Willie is CEO of Blue Pillar

Return TopTrackbackPrintPermalink
Currently rated 0.0 by 0 people
www.periporn.com sicak sohbet
antalya escort
ankara escort pendik escort
+18 film izle
bozdurma
huluhub.com
asyabahis pinbahis deneme bonusu bedava bahis deneme bonusu veren siteler bonus veren siteler bedava bonus casino siteleri bahis siteleri
escort Kayseri