Steel and aluminum: Both products feature specific attributes, and all qualified commercial roofing contractors have the experience and expertise to install both. So why isn’t aluminum used more extensively? The primary obstacles have been cost per square foot and misconceptions concerning the structural limitations of aluminum. Recent innovations in panel design, though, have served to significantly broaden the application range for aluminum panels, and several aluminum profiles are now available from a number of manufacturers that carry the UL 580 Class 90 wind uplift rating.Despite recent inflation in steel costs, the initial installed cost of aluminum remains higher than steel, but that is not the end of the story. In many areas of the country, a full analysis of life-cycle benefits might actually show that aluminum is less expensive than steel. For many applications, building owners are increasingly deciding to use aluminum when they are fully informed of its advantages.An intrinsic attribute of aluminum is its corrosion-resistant properties – a significant advantage over steel. In the typical architectural application, G-90 galvanized steel or AZ 55 Galvalume® steel are coated with a full Kynar 500 fluorocarbon finish. Either substrate provides adequate protection in a “normal” environment unless and until it is abraded. Surface scratches can cause the corrosion process to accelerate. This is particularly the case in acid rain regions, coastal areas, and other aggressive environments. In such areas, the advantage quickly switches to aluminum due to its superior corrosion resistance. Most manufacturers’ warranties specifically exclude corrosion of the substrate. Over the past 30 years, aluminum has proven to be the better substrate for those applications where substrate corrosion might be a concern.But corrosion resistance isn’t the only reason aluminum is gaining popularity. The material is notably “designer friendly” and works well in fabricating even the most complex designs. Aluminum is easier to work with than steel, and is generally available in a wider range of gauges than steel, thereby making it easier to coordinate fabrication of the various exterior metal components for a project. Aluminum features significantly lower weight per panel – in some cases a contractor might be able to use one installer vs. two. It’s easier to cut and work in the field. This adds up to labor cost savings.Aluminum also scores well in sustainable design. A typical aluminum roof panel includes 90-percent recycled content and it is fully recyclable when necessary. Combined with a solar-reflective Energy Star®-listed “cool” coating, aluminum roofing is an excellent choice for a LEED-qualified project.Many architects prefer aluminum and use it every chance they get – particularly when they are working directly with building owners. They feel the additional cost of aluminum is inconsequential compared to the overall “value” enhancement of the project. In any assessment of overall life-cycle and long-term maintenance costs, though, the choice between steel and aluminum begins to even out. And if your project is located in an acid-rain environment or direct coastal area, you should strongly consider aluminum.Michael F. Petersen is president at Chicago-based Petersen Aluminum Corp. (www.pac-clad.com)
Voice your opinion!
Voice your opinion!
To join the conversation, and become an exclusive member of Buildings, create an account today!
Sponsored Recommendations
Sponsored Recommendations
Latest from Smart Buildings
Latest from Smart Buildings
Courtesy of Janelle Penny
Courtesy of Janelle Penny
Sponsored
Sponsored