Sponsored

The P.V.B. lockbox is a security device created out of necessity

Feb. 16, 2018

Thieves are stealing backflow valves because they are easy to get to and replacement costs can be as high as $3900 for each one. Pay a little now for a secure solution and save a lot of stress, time, and money. Mounted directly to the wall and held in place by security bolts and anchors, the lockbox has service openings which allow the device to be tested for pressure and to be winterized, a necessary maintenance procedure in the northern states where irrigation is not needed year round.

J.A.J.C. MFG LLC I 20412 LORNE AVE TAYLOR MI 48180 I 800.372.1434 I 313.294.9070 FAX

WWW.PVBLOCKBOX.COM

The P.V.B. LOCK BOX will come in one size 24x24x12 this will fit all wall mounted Pressure Vacuum Breaker units ranging from 3/4" to 2 1/2" as you may have seen at the 2012 irrigation show in Orlando, FL this product is professionally built in the U.S.A. The product is powder coated hunter green, it comes with four security bolts and 4 lead anchors it also comes with one security key unlocking bit. This unit wholesales for $319.99 and the manufactures suggested retail is $499.00. Our contractors are in stall these units at $600.00 and the unit installs in less than 20 minutes.

The CLOCKBOX will come in one size 14x17x10 this will fit most outdoor irrigation controllers, this unit will also be powder-coated hunter green and come with a removable front cover for access to the unit. The locking mechanicsm will be (2) security hex pin locking bolts and the unit will come with two unlocking bits one for the owner and one for the irrigation or maintenance tech. This unit wholesales at $259.99 and MSRP is $439.00. Our contractors installed pricing is $539.00 and this also installs in less than 20 minutes. By installing this product this assures that no unauthorized person or persons are tampering with the irrigation controller and will also protect it from being stolen.

Backflow Theft Prevention Cage

Cage completely covers the backflow unit and is accessible for service and winterization
The P.V.B. Lock Box comes in one size: 24” x 24” x 12”
The Clockbox comes in one size: 14” x 17” x 10”
Comes completely assembled and ready to install with (4) hex pin anchors and bolts and (1) unlocking bit
Can be installed on any wall mount vacuum breaker from 3/4” to 2 1/2”
Units are primer powder coated in hunter green
Can be installed in less than 20 minutes and provides a lifetime of protection against vandalism and theft
All theft prevention cages are made in the U.S.A.

CALL 800.372.1434 TO PLACE YOUR ORDER, EMAIL [email protected], OR VISIT US AT www.PVBLockBox.com.