• Frankfurt Airport Incident Calls Attention to Importance of Facility Evacuation Plan

    Use these free tools to ensure that your plan meets minimum requirements.

    Feb. 14, 2018
    6 min read
    1651069829185 Jay Watts

    The Frankfurt Airport was evacuated Tuesday afternoon local time. According to a tweet by the German police, it was caused by a “mistake of an air safety assistant. Despite a positive explosive test, a four-member French family was released into the security area. The family was found, questioned and allowed to travel further.” It’s not known at this time what caused the positive test.

    Related: Building Evacuation Questions Answered

    The German Federal Police evacuated gates A and Z at Frankfurt Airport’s Terminal 1, and reopened a few hours later. “The safety of our guests is the top priority at Frankfurt Airport. We apologize to all passengers and customers for their inconvenience and thank them for their calm and prudent behavior,” said Anke Giesen, COO of Fraport AG, in a news release.

    But in the passengers’ eyes, the damage may already be done. Jay Watts, CMAA, shared his photos on Twitter (@GamedayEveryday) of the crowded room of people who were growing restless. 

    Passengers in the Frankfurt Airport were evacuated due to a safety incident. | Photo: Jay Watts, CMAA

    This incident is an important reminder of why all buildings need to have an evacuation plan. You never know when or what type of incident will occur when it’s needed.

    *BUILDINGS is a member of the Amazon Services LLC Associates Program and receives a small commission from each sale of this book from our site.

    In the case of the airport evacuation, many people were unfamiliar with their surroundings or the procedure. In fact, Adam Miller, another passenger who tweeted about the incident (@TheMaxamillion), stated at the time it had been five hours, packed shoulder-to-shoulder, waiting to hear why flights were canceled or what they should do next. All they saw was a police presence.

    Having an evacuation plan isn’t enough.

    • Can you find it at a moment’s notice?
    • Have you updated it lately and practiced it?
    • Have you identified leaders who will help carry out the plan and keep your building occupants safe?

    The threats that require evacuation of a building are many and varied: fire or release of environmental contaminants (in your building or a nearby one), weather (floods, earthquakes, tornadoes), criminal threats (bombs, assailants, workplace violence) and building equipment failures (power, elevators, false alarms). Not all threats require the same response.

    Make sure your facility has an evacuation plan and that occupants in the building know what to do.

    Without a solid evacuation plan, or a more formally named Emergency Action Plan (EAP), your organization can be at risk of fines, liability, loss of life and property damage when an emergency goes from bad to worse. Moreover, your facility is not likely exempt from OSHA regulations regarding EAPs – almost every business requires one.

    Who Is Required to Have a Plan?

    If fire extinguishers are provided in a workplace and any occupants evacuate in an emergency, OSHA requires a written EAP. The only exemption is a facility with an in-house fire brigade in which every employee is trained and equipped to fight fires. If you have 10 or fewer employees, you may communicate your plan orally rather than in writing.

    Related: Emergency Management Planning

    For offices, small retail shops and small manufacturing sites, a comparatively simple EAP should suffice. Sean Ahrens, security market group leader for Affiliated Engineers, Inc., says that adequate EAPs can often be done by building owners themselves without tapping outside consultants or experts.

    According to OSHA, EAPs must cover (but aren't limited to) the following basics:

    • Means of reporting fires and other emergencies
    • Evacuation procedures and emergency escape route assignments
    • Procedures to be followed by employees who remain to operate critical plant operations before they evacuate
    • Procedures to account for all employees after an emergency evacuation has been completed
    • Rescue and medical duties for those employees who are to perform them
    • Names or job titles of persons who can be contacted for further information or explanation of duties under the plan

    To avoid the additional hazards that a chaotic evacuation can cause, employees in charge or “wardens” need to know the conditions for shelter in place and for evacuation (and where to assemble occupants for each threat).

    A clear chain of command is important to authorize action. Wardens also need to have a plan to assist visitors and physically challenged occupants. One warden for every 20 employees should be adequate. After evacuation, the wardens must account for employees.

    OSHA e-Tools to the Rescue

    The OSHA website has a variety of resources, including checklists with questions/answers that take users step by step through the process of creating a plan. Here’s a tool to help you build your own EAP.

    The best emergency action plans include employees in the planning process, specify what employees should do during an emergency and ensure that employees receive proper training for emergencies. Encourage employees to offer suggestions about potential hazards, worst-case scenarios and proper emergency responses. Once completed, review the plan with your employees to ensure everyone knows what to do before, during and after.

    Keep a copy of your EAP where employees can find it or provide a copy to all.

    Despite the relatively simple process of creating an adequate EAP, Ahrens believes that a great many employers – even large and sophisticated ones – fail to meet minimum requirements. He recalls visiting the upper floor of a high-rise office building in New York City that began to sway due to earthquake aftershocks.

    On topic: Importance of Emergency and Exit Lighting

    In the absence of immediate communication from building management, occupants made up their own minds to self-evacuate. In this case, these evacuees could have been endangered by falling glass and debris if they had assembled in the street.

    Ahrens advises employees to take what he calls a simple “PDCA” approach – plan, do, check and act. Check your plan regularly. Whenever occupancy conditions change, revise and update. The plan doesn’t always have to be practiced in the field, but you should at least have regular roundtables with employees about how to respond to emergencies.

    Valerie Dennis Craven contributed to this article. The article was originally published Feb. 14, 2018, and updated Aug. 7, 2018.

    Two hand-picked articles to read next:

    Voice your opinion!

    To join the conversation, and become an exclusive member of Buildings, create an account today!

    Sponsored Recommendations

    Sign up for our Newsletter
    Get the latest news and updates.

    Latest from Fire & Life Safety

    © Endeavor Business Media
    David Olds of FPS presents at the 2025 Southern California Facilities Expo in Anaheim.
    Keeping fire detection, alarm, and suppression systems functioning is paramount to keeping people and property safe. These five NFPA standards are key for building owners and ...
    April 21, 2025
    © Endeavor Business Media
    Raul Guzman speaks at the 2025 Southern California Facilities Expo.
    OSHA requires that employers provide their employees with a safe environment and the training they need to do their jobs safely. This presentation at the Southern California Facilities...
    April 21, 2025

    Sponsored