EdgeBox RI is an engineered metal alternative to traditional wood nailers. Made of heavy duty 20 Ga. galvanized steel with reinforcing spines that will not rot, twist or split...
TerminEdge LT is a three-piece snap-on, fascia system that is fast and easy-to-install. Specifically designed for single-ply applications that do not require an approved Factory...
OMG Roofing Products has introduced PowerGrip Universal 7 (PGU-7), a rooftop attachment anchor for mounting solar racking systems and other products to virtually any commercial...
OMG BeadPro Cart now offers roofing contractors a choice of 6- or 12-inch on center bead application. Also offers a stable platform for holding adhesive canisters and allows contractors...
RhinoBond is an induction-based process for installing thermoplastic roofing materials (like PVC and TPO). It uses one fastener and one plate to secure both the insulation and...
Hercules-Plus is a line of retrofit roof drains with integrated vortex breaker technology that improves the flow of water from the roof. The flow capacity is up to 2.5 times higher...
OMG Roofing Products has rebranded its popular line of PermaSnap Coping systems to include the former QuickSnap Coping products. The re-named and expanded product line includes...
The RhinoBond Plate Marking Tool is lightweight, simple to use, and easy to maneuver. Every time it passes over a properly installed plate, it leaves a temporary mark on the surface...
The new Pace Cart Conversion kit is designed for use on PaceCart 2B and PaceCart 3 equipment and provides a more economical option than purchasing new equipment or other retro...
PowerGrip Universal is a solar rooftop attachment anchor for racking systems on commercial roofs. Reduces or eliminates the need for ballast in solar racking systems.Provides ...
EdgeBox RI is an engineered metal nailer system designed to replace wood nailers, which compromise the roof system if they warp, rot, or decay. Made of 20-gauge galvanized steel...
TerminEdge is one of the industry’s strongest facia systems with Factory Mutual (FM) system ratings up to 1-315. The system is ANSI/SPRI/FM-4435/ES-1 tested, FM approved, compatible...
The Safety Yellow PipeGuard with Integrated Roller identifies potentially dangerous rooftop trip hazards. Includes a roller for applications requiring 4-inch and smaller diameter...
Constructed of 20-gauge galvanized steel to prevent rotting and decay, OlyBlok is a metal nailer system that replaces wood nailers used on the perimeters of low-sloped roofs.10...
The PowerGrip Plus Roof Mount System is a watertight structural attachment system used to secure ballasted solar racks and other equipment to thermoplastic membranes.Providing...
Avoid plumbing failures with the SpeedTite roof drain, a tool-free system that facilitates maximum allowable flow for gravity-based roof drainage systems.The 10-inch long drain...
PowerGrip is a mounting system that secures solar racks to thermoplastic (TPO and PVC) roofing membranes. Once secured and heat welded in place, PowerGrips virtually eliminate...
Intended for repairs needing a full 24 inches of coverage, the 12.5-inch-wide EverSeal tape allows a half-inch overlap when fixing punctures, tears, splits, and roof seams. It...
EverSeal’s instant bond with all common roof materials ensures long-lasting, watertight repairs. It is designed to fix punctures, tears, splits, and roof seams, but can also be...
The Safety Yellow PipeGuard is compatible with all common roof covers, including PVC, and clearly identifies potential rooftop trip hazards. Made from 100% recycled HDPE, the ...
The retrofit-friendly RetroDriller fastener features 3 inches of thread, a #3 square drive, and a sharp 0.5-inch drill point for fast and easy installation. It can cut up to 3...
The RhinoBond System from OMG Roofing Products is an ideal alternative for installing thermoplastic single-ply systems in metal roof retrofit applications. It uses the same fastener...
